543 -HEAVY LOAD TRAILER FOR SALE

March 23, 2011

FOR SALE
=========
3 Units

Manufacturer: Kamag
Year: 2000
Pay load: 125 ton
including: 22 tables (see bottom photo)

Advertisements

541 – 50 T PED CRANE FOR SALE

January 17, 2011

AMERICAN 11750 PEDESTAL CRANE
CAPACITY CHART ATTACHED
POWERED BY CATERPILLAR DIESEL ENGINE
TWIN DISC TORQUE CONVERTOR
150′ BOOM
HIGH ‘A’ FRAME
110,000 Lbs COUNTERWEIGHT
2 MAIN HOIST DRUMS WITH CONTROLLED LOWERING
OPERATOR CAB
Fitted out with new windows and soundproofing
Fitted with window wipers and cab heater
New operator seat
* Machine will be completely stripped to bare deck.
* Engine & Torque convertor send away for rebuilding
* All gears and pinions removed and checked for wear and replaced as necessary
* All bearings and journals checked and replaced as necessary
* All drums checked for wear and rebuilt/ replaced as necessary
* All new linings fitted
* New air piping throughout machinery deck
* All hydraulic pumps and motors rebuilt
* Machine will then be reassembled and all operations checked.
* New machine deck panel work
* Boom will be cleaned and painted.
 Sheaves and bearing checked/ replaced as necessary
* Machine will be in painted manufacturers colours unless otherwise requested.
Price – Euro 1.450.000 Ex Works, UK


540 – 250 T MARINE CRANE FOR SALE

January 17, 2011

Manufacturer: Kenz
Type: 250/4500 OS AHC
Capacity: 250 ton
Year: 1998
Boom length: 36m
This is a 250-ton rated active heave compensated type crane suitable for re-installation on a vessel or offshore platform.
This crane has been progressively rebuilt over the last two years and is in almost new condition. 36-meter boom length, electric over hydraulic power.
Owner’s have been meticulous about full maintenance on the crane and hydraulic systems.
The  ship that it is mounted on is currently working in the Persian Gulf and the current contract should be done in early to mid-March.  (When I initially sent you this presentation they did not have a  contract for the ship so it was readily available).
If you get a serious customer the owners of the vessel will let you go aboard the ship while it is working in the ME  so they could inspect it , and then if they wanted to buy it they could make a deposit on it that would hold it for them until the current contract is over with.
It is in excellent used condition as owners have fully rebuilt this crane over the last two years.


540 – 40 T OFFSHORE CRANE FOR SALE

September 14, 2010

40Ton SWL Mac-GREGOR Crane,

Yr. Built 2006, 440V, 60Hz

which are available on a recently beached Vessel  in India…

There are 3 Nos of Twin Cranes,

phasewise as the vessel is being scrapped, the Cranes can be Physically inspected and tested

 The delivery can be effected from the day the confirmation is received, subject to availability, we suggest a visit by your representative asap to take this further…


533 – 20 X WINCH FOR SALE

July 13, 2010

Details
Four (4) x 60 ton hydraulic Mooring Winches made by Brissonneau & Lotz France.
The single drum winch is powered by  186 cm3/rev high volume Linde motor that gives a line
pull of 60 ton at the 1st layer with line speed of 9 m/min, brake holding capacity on 1st layer
of 110 ton.
Drum storage capacity : 1000 meter of 52mm in 15 layers

 
Article number: 040
Date of construction: Jan 1, 2009
Price: On request

Details
The winch would comprise a single main plain cored drum of fabricated construction, fitted with phosphor bronze bushes, running on a high tensile steel main shaft. The main shaft would be supported on the fabricated base plate by heavy roller type bearings, mounted in steel housings, bolted to the winch base frame.
Mounted to the winch drum flange, would be a fabricated brake track, fitted with a hydraulically released and spring applied bake, giving a failsafe to On-Mode of operation. The brake assembly would comprise a fabricated brake band, hinge pins with mechanical linkages, adjusting screw, hydraulic cylinder and return spring.
The brake linings are a non asbestos marine grade.
Transmission would be from to two low speed high torque medium pressure hydraulic motors, driving through a totally enclosed spur reduction gearbox, driving in to a final drive guarded spur reduction gear set.
Also fitted to the main gearbox output drive pinion would be a hydraulically operated dog type clutch. The clutch is used to disconnect and protect the hydraulic drive motors during high speed payout, when the drag is in operation.
Fitted to the spur gearing at the front side of the winch would be a fresh water cooled air controlled drag brake to assist with back tensioning when running out the wires by the anchor handling tug.
An automatic wire spooling system would be provided, designed or under drum reefing, comprising a lead screw and drive tongue, fabricated carriage with bushed vertical rollers, guide bar, side support frames, chain drive system including driver and driven chain wheels, chain, guard and a manually operated positioning clutch.
The winch base plate would be suitably drilled to allow the fitting of the winch to the deck settings by means of your free issue holding down bolts.
Specifications per winch
Duty Pull at Layer One                      – 85.0 tonne @ 0 – 12.0 mtr/min
– 59.0 tonne @ 0 – 17.0 mtr/min
– 28.0 tonne @ 0 – 32.0 mtr/min
Duty Pull at Layer Six                       – 52.3 tonne @ 0 – 19.5 mtr/min
– 36.3 tonne @ 0 – 27.6 mtr/min
– 17.2 tonne @ 0 – 52.0 mtr/min
Duty Pull at Layer Eleven                   – 37.8tonne @ 0 – 27.0 mtr/min
– 26.2 tonne @ 0 – 38.2 mtr/min
– 12.4 tonne @ 0 – 72.0 mtr/min
Drum Capacity                                 – 1500mtr x 52mm dia. Wire Rope in eleven layers
Brake Holding Load                           – 150.0 tonne @ First Layer
Drag Brake at Layer One                   – 10.0 tonne @ 0 – 100.0 mtr/min
Drum Core Diameter                         – 780mm
Drum Flange Diameter                       – 2,500mm (One free layer)
Drum Flange Distance                        – 1,760mm
Oil Flow                                         – 600litre/min
Working Pressure                            – 230 BAR
Power Requirement                         – 270kW Approx

Article number: 020
Date of construction: Jan 1, 1996
Price: On request

Details
125 tons Brissonneau & lotz Anchor Mooring Winches with wire capacity of 1500 meter dia. 76mm.
Brake holding capacity 300 tons, hydraulically powered by Linde motor type HMF 135-02.
On the gearbox there is a manual clutch for using the winch on 35 ton with high speed and
125 ton with low speed. Dimensions : Length 4,50 meter x Width 3,55 meter x Height 3,50 meter.

Article number: 016
Date of construction: Jun 1, 2009
Price: On request

Details
Six (6) pieces Hydraulic Mooring Winches made by Ridderinkhof with pulling capacity of 60
tons at First layer, powered by Hägglunds motor MB 84 38000
Low speed : 7,5 meter/min and high speed at 22,5 meter/min.
Power support at 252 liter/min at 225 bar.
Max Hold on break at 100 tons on first layer

Article number: 028
Date of construction: Jan 1, 1996
Price: On request

Details
60 tons hydraulic towing winch made by Stocznia Szezecinska Poland.
Pulling 60 tons powered by Linde motor with wire capacity of 1020 meter on 6 layers,
diameter 39mm or 42mm inclusive spooling device. Weight 14 ton

Article number: 026
Date of construction: Jan 1, 1987
Price: On request

Details
Three (3) side by side winches with additional working drums and on both sides warping
heads. Pulling capacity 30 tonnes on the two main drums with 600 meter dia. 30mm steel
wire in 14 layers. Winches do have friction clutches and automatic brakes to have free fall.

Article number: 021
Date of construction: Jan 1, 2010
Price: On request
Details
Single drum 35 tons hydraulic Anchor Mooring Winch with auto spooling device with manual
de-clutch, open spur gear & pinion with cover. Brake maximum 90 ton static on 1st layer,
hydraulic operated, manual override with hydraulic claw type clutch, warping head dia. 450mm.
Hydraulic motor  : Intermot AM 4600 H7 A1 D90

Article number: 004
Date of construction: Jul 1, 2007
Price: On request
Details
Electric Mooring Winches Type EMO 34/2S-2, split type, Dimensions; dia 368 / dia. 1675
455 + 470 mm length for storing 220 m rope ø56 mm in 2  + 10 layers. Breaking load
of the rope: 688kN.
Each drum provided with dog clutch and band brake, both hand operated.
With 2 warping head, cast steel dia. 375mm, coiling dia. 430mm, fixed on the mainshaft.
All shafts running on largely dimensioned roller- or ball bearings.
Totally enclosed reduction gearbox, oil bath lubrication. Number of mechanical speed steps;
1 Standstill heating foreseen in the oil bath with thermostat.
Electric motor flange mounted on gearbox, parallel to the main shaft.
The brake bolts and spindles are made of stainless steel and with individual grease nipples.
All pivot points equipped with stainless steel shafting with bronze bushes, all to be fitted with
brass grease nipples.

Kind regards,
Toon Coenraadts


532 – 10 no. MARINE WINCH FOR SALE

May 16, 2010


530 – DECK CRANE FOR SALE

March 22, 2010

We can develop for sale of the following secondhand deck cranes.

1.   15 ton Deck Crane  

2.    32 ton Deck Crane

3.    4.5 ton Knuckle boom type Deck crane

4.    3 ton Knuckle boom type Deck crane

5.    4 ton Knuckle boom tyope Deck crane